New Arrival China Anti-Crack - Moisture repellent manufacturer factory sell from China – Longou
New Arrival China Anti-Crack - Moisture repellent manufacturer factory sell from China – Longou Detail:
ADHES® P750 is a highly effective hydrophobic and water-repellent products which applied in cement-based mortar, white powder, can effectively improve the hydrophobic nature and durability. It is especially suitable for surface hydrophobic and body hydrophobic situations. Through the chemical reaction, protects the cement base building and the mortar surface and matrix, prevents the water penetration. ADHES® P750 is used in cement mortar, waterproof mortar, joint material, sealing mortar, etc.Easy to mix in cement mortar production. The hydrophobicity is related to additive quantity, can be adjusted according to customer’s requirement. No delay wettability after adding water, non retraining and retarding effect. No effects to the surface hardness, adhesion strength and compressive strength. It also works under alkaline conditions (PH 11-12)
|Appearance||White freely flowing powder|
|Bulk density||350–550 g/l|
ADHES® P750 is mainly applicable to cement based mortar system with high
hydrophobicity and waterproof requirements.
➢Water proofing mortar
➢Cement based mortar system
➢Especially suitable for plastering mortar, batch hanging mortar, joint material, sealing mortar/sizing
➢Used for powder waterproof cement-based system, improve water repellent.
➢Reduce water absorption
➢Improve the duability of cement-based building materials
➢Linear relationship between hydrophobicity and additive quantity
Durning the hardening phase
➢ Low additive amount
➢Wettability and good mixing performance
➢Excellent construction performance
➢ Long-term storage stability
➢Keep the physical property of cement mortar
➢Free flow without dust
➢Good compatibility wiht other additives
Storage and package：
Store in a dry and cool place in its original package. After the package is opened for production, tight re-sealing must be taken as soon as possible to avoid ingress of moisture;
Package: 15kg/bag, multi-layer paper plastic composite bag with square bottom valve opening, with inner layer polyethylene film bag.
The warranty period is two years. Use it as early as possible under high temperature and humidity, so as not to increase the probability of caking.
ADHES® P750 can be mixed with other drying materials to produce powdered finished products. Due to ADHES® P750 has thermoplastic properties, so the mixing time should be shortened as far as possible to avoid the significant increase of temperature cased by high shear force. The hydraulic and non-hydraulic dry mixture of ADHES® P750 can be easily mixed with water before construction. When stirring powdered products, inject the required amount of water, then add and stir in the dry powder products. Too much stirring will introduce excess bubbles. By different properties of other additives, the mixture should be rest for about 1-5 minutes before use. Dosage and mix: Recommended dosage 0.2-1.0%, depending on final product requirments, redeuce mixing time as much as possible. Compatibility: ADHES® P750 has good compatibility with RDP, Early strength agent, Retarder, Cellulose ether, etc mortar additives.
•Storage and delivery Store in a dry place with a temperature below 25°C and use within 6 months. If the packing bags are piled up, damaged or opened for a long time, it is easy to cause the redispersible polymer powder to agglomerate.
• Product safety
ADHES® is not generally classified as dangerous goods. However, we still recommend that any individual who USES and comes into contact with ADHES® detest powder refer to the separate safety instructions. Our safety experts are happy to advise you on safety, health and environmental issues related to our products.
Product detail pictures:
Related Product Guide:
With reliable excellent approach, great name and ideal consumer services, the series of products and solutions produced by our company are exported to many countries and regions for New Arrival China Anti-Crack - Moisture repellent manufacturer factory sell from China – Longou , The product will supply to all over the world, such as: Pakistan, Sacramento, New Orleans, Really should any of these items be of interest to you, please let us know. We will be pleased to give you a quotation upon receipt of one's detailed specifications. We've our personal specialist R&D enginners to meet any of the requriements, We look forward to receiving your enquires soon and hope to have the chance to work together with you inside the future. Welcome to take a look at our organization.
By Melissa from Algeria - 2018.11.02 11:11
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Emily from Manchester - 2017.06.19 13:51